Connect Google Search Console

Bring your real Google clicks, impressions and queries into Findnis, with 16 months of history. Set up the property on Google's side first, then connect with one consent screen.

7 min read · Updated

Opens at launch. Google has to finish reviewing the Findnis app before the Search Console connection can open to everyone. Until then, the Google card in Integrations shows Requires Google verification and the Connect with Google button is disabled. You can prepare the Google side today (steps 1–4 below) so connecting takes one click when it opens.

What you’ll need

  • A Google account that is an Owner or Full user of your Search Console property.
  • For a new property: access to your domain’s DNS settings (at your domain registrar or host).
  • Your website already added to Findnis (see Add your website).

On Google’s side: prepare the property

  1. Go to search.google.com/search-console and sign in with the Google account you will use.
  2. If your site is not listed, click Add property and choose Domain. Type your domain without https:// (for example brightfurniture.com).
  3. Google shows a TXT record. Copy it, open your domain provider’s DNS settings and add a TXT record with that value. Back in Search Console, click Verify. DNS changes can take from a few minutes to a day.
  4. If someone else owns the property, ask them to open Settings > Users and permissions > Add user, enter your Google account and choose Full (or make you an Owner). Restricted users can’t be used.

In Findnis: connect

  1. Open Integrations from the left menu (under Work).
  2. In the Google section, click Connect with Google.
  3. Choose the Google account that has access to Search Console (and GA4, if you use it).
  4. On the consent screen, leave every box ticked and click Allow. Findnis only reads data; it never changes anything in your Google account.
  5. When you are back in Findnis, pick your property from the list.
  6. Open the Setup wizard, expand Connect Google Search Console and GA4 and click Test connection.
The Integrations page in Findnis with Google, Meta and Other sections, each listing its data sources; the Google header says it is available once Google verification is complete
Integrations shows each data source and what it is waiting for. This demo workspace shows sample data.

What you get

  • Clicks, impressions, click-through rate and average position, by query and by page.
  • 16 months of history on the day you connect. Google only keeps 16 months; Findnis keeps everything from then on.
  • A split between brand and non-brand searches, and keyword suggestions from your highest-impression queries.
  • Ownership of your site in Findnis is verified automatically when the property matches the domain.

Search Console data runs 2–3 days behind, so the last few days are always empty. That is normal.

Common problems and fixes

The “Connect with Google” button is disabled

Google is still reviewing the app. Skip the step for now; it switches on at launch and the setup guide tells you when.

My property isn’t in the list

The Google account you connected must be an Owner or Full user of the property. Check in Search Console under Settings > Users and permissions, then connect again.

“No access to the Search Console property”

Same cause: the connected account has no or restricted access. Add it as a Full user and test again.

“A required permission was not granted”

A box was unticked on the consent screen. Remove the connection in Integrations, connect again and leave every box ticked.

The charts are empty

A newly verified property needs 2–3 days before Google has data. If the property is older, check that you picked the right one (domain property vs. a https://www. URL-prefix property).